REGUPOL sound and drain 22
Impact sound insulation
The 15 mm thick impact sound insulation REGUPOL sound and drain 22 has a profiled underside and is ideally suited to a wide range of outdoor constructions on terraces, loggias, roofs and balconies.
REGUPOL sound and drain 22 is a versatile, 15 mm thick impact sound insulation layer with a profiled underside and a low dynamic stiffness of ≤ 21 MN/m3 which is used in a wide range of constructions on roofs and terraces. Depending on the specific build-up, the impact sound reduction value achieves between ∆Lw ≥ 28 dB and ∆Lw ≥ 37 dB.
- CE marking
- Impact sound reduction ∆Lw ≥ 28 dB to ∆Lw ≥ 37 dB
- Load bearing capacity up to 50 kN/ m²
- Compressibility ≤ 2 mm
- Protective membrane DIN 18531-2
Polyurethane elastomer composite
Length 10,000 mm, width 1,250 mm, thickness 15 mm
Weight per roll
max. 81.0 kg
Weight per m²
max. 6.5 kg
REGUPOL – the expert by your side
REGUPOL sound and drain products are monitored by internal quality control and third-party inspections subject to the European Technical Assessment ETA-18/0239, which guarantees reliable planning within the European Economic Area.
In compliance with ETA 18/0239, REGUPOL sound and drain 22 shows ozone, oxidation, hydrolysis and weather resistance. It serves as a protective layer to prevent damage to the roof sealing and has been developed with good drainage properties. For balconies and pergolas, REGUPOL sound and drain 22 can be used in combination with Schöck Isokorb® XT.
REGUPOL sound and drain 22 can be installed under fine chippings with concrete tiles but should be checked for stability on-site prior to installation due to the possibility of different mixtures of fine stone chippings that can have different load bearing capacities. To increase stability, pressure resistant thermal insulation ≥ 300kPa can be used. REGUPOL sound and drain 22 is compatible with various roof sealings containing PVC but needs to be approved in each individual case.